Two Tank Automated Ultrasonic Cleaner
This automated precision four stage cleaning system is comprised of an ultrasonic wash, two ultrasonic immersion tanks with spray rinse, and a hot air dryer. Part transport is completed via an integrated part handling system done automatically per the pre-defined cleaning cycle.
Specifications
| Wash/Rinse/Rinse | Dry | |
| Inside Dimensions | 10"x7"x24" | 10"x7"x24" |
| Overall Dimensions | 78"x32"x 97"L system total | 78"x32"x97"L system total |
| Frequency | 40kHz standard (25, 68, 170 kHz available) | NA |
| Power Requirements | 240V | 240V |
| Ultrasonic Power | 500W Average / 1000W Peak | NA |
| Heat Power | 1000W | 2000W |
| Construction Material | Stainless Steel | Stainless Steel |
Automation PLC
- Transporting baskets through process
- Ultrasonic wash time
- Wash agitation (if selected)
- Rinse time
- Rinse DI fill time
- Rinse agitation (if selected)
- Rinse spray time
- Dryer lid open/close
- Blow-off time
- Dryer time
- Load and unload table sensors
- Unload alarm if basket is not removed
Sonic Touch®II
- Countdown Timer for Ultrasonic operation
- 7-day programmable Timer for heating system, pump and filter, and oil skimmer
- Sweep Control for the Generator
- Elapsed Time Meter for monitoring ultrasonic power, heating system, pump and filter, and oil skimmer
- Low liquid level sensing for autofill
- Power Output Display- displays accumulative output relative to number of generators
- Ultrasonic generator power output indicator alarm and alarm log
- Password protected control for Level of User (Operator/Supervisor)
- Preventative Maintenance Timer/Schedule function
- SOVI ® (Sonic Output Validation Indicator) diagnostic system- validates operating condition of the system. Error code indicates fault.
