1,100-gallon industrial ultrasonic wash system
This custom 1,100-gallon industrial ultrasonic wash system is designed for demanding, high-volume cleaning applications where consistent performance and durability are essential. Opposing sidewall 40 kHz ultrasonic transducers provide 20,000 watts of average ultrasonic power, while 30,000 watts of heat and a 20 GPM filtration system help support effective, controlled cleaning. The heavy-duty 316L stainless steel tank, centralized controls, and low liquid level protection round out a system built for long-term, continuous operation.
| Inside Dimensions | 67"x120"x52"D |
| Working Dimensions | 60"x120"x48"H |
| Overall Dimensions | 73"x130"x64"H |
| Frequency | 40kHz standard (25, 68, 170 kHz available) |
| Power Requirements | 240V Single Phase (other voltages available) |
| Ultrasonic Power | 20000W Average / 40000W Peak |
| Transducer layout | Opposing sidewall |
| Heat Power | 30000W |
| Filtration | 20 GPM |
| Construction Material | Stainless Steel |
| Controls | Digital Timer and Digital Temperature |
| Safety | Low liquid level protection |
Built for Large, Heavy Parts
- Opposing sidewall transducers put ultrasonic energy into the load from both sides, for even cleaning across a 10-foot working length.
- 30,000 W of heat brings 1,100 gallons up to process temperature and holds it during continuous use.
- 20 GPM filtration keeps removed oil and particulate out of the bath, extending solution life between changes.
- 316L stainless steel resists corrosion from aqueous detergents and heated solutions over years of service.
- Configurable frequency: 40 kHz standard, with 25 kHz for heavier soils and 68 or 170 kHz for more delicate parts.
Typical Applications
Any part too big or too heavy for a standard tank, including:
- Large electric motor components. See DC motor armature cleaning for the recommended process.
- Large molds and dies (see ultrasonic mold & die cleaning)
- Large filters, heat exchanger components and process equipment parts
- Heavy machinery and engine components during overhaul
Options and Customization
Every system is built to order in the USA. Ask us about alternative frequencies, other supply voltages, rinse tanks, lift or basket handling for heavy loads, and multi-tank wash/rinse/dry lines. Need a different size? See our large ultrasonic cleaners (39–204 gallons), our 500-gallon industrial ultrasonic tank, or custom ultrasonic cleaners built to your dimensions.
Frequently Asked Questions
Can the ultrasonic frequency be changed?
Yes. 40 kHz is standard, and the system is available at 25, 68 or 170 kHz to match the parts and soils you clean.
What power supply does it need?
240 V single phase as standard. Other voltages are available. Tell us your plant supply when you request a quote.
Can the tank be built to different dimensions?
Yes. This is a custom system, and we build industrial ultrasonic tanks to the size of your largest part. Contact us with your part dimensions and weight.
Which cleaning solution should I use?
It depends on the contaminant and the part materials. See UPC ultrasonic cleaning detergents or ask our team for a recommendation.